6M Long Mechanical Plate Guiiotine Shear machine in Metal Cutting
Hot sell hydraulic guillotine shear, hydraulic shearing
machine,hydraulic cutting machine,
sheet press brake machine, CNC press brake,tandem press brake,
1, the second generation of hydraulic shears.
2, the frame is welded structure, and by eliminating stress
treatment, good rigidity to maintain
the accuracy for long.
3, the use of advanced integrated hydraulic systems, machine work
stable and reliable.
4, using the three-point support rolling guide to eliminate the gap
bearing surface, the shear
5, the blade clearance with manual, electric adjustment,
calibration, digital display rapid,
accurate and convenient.
6, rectangular blades with four cutting edges are used
interchangeably, long service life.
7, adjustable shearing angle to reduce deformation of the sheet,
improve part quality.
8, the upper turret with introversion design, easy blanking,
improves the precision parts.
9, with a length of cut length and segmentation capabilities,
10, motorized backgauge with digital display.
11, backgauge, buffering concessions.
1,Hydraulic parts: hydraulic system with well-known manufacturers,
the main valves with
2,With domestic brand within the rodent wheel pump (Shanghai
3,With Jiangsu Jianhu Huaxing cylinders, mainly seals or tripod
base is valqua
4,Electrical parts: with Korean-owned Alto Knicks digital display,
with Tony winner Siemens
5,With Siemens electrical components
6,Other major parts: with Shanghai blade, with front bracket
Steel Plate Cutting machine featurs:
1. Sheet plate welded structure
2. Hydraulic transmission and accumulator return
3. Reliable performance and nice appearance
4. With numeric-control system special for shearing machine
5. Counting function
6. Digital display device is available
7. Frequency conversion control technology
Hydraulic guillotine shear (shearing machine)
1. The design style is as per Germany Standard DIN55222T2-80
2. The frame is steel welded construction, vibration to eliminate
stress, with high strength
and good rigidity
3. Adopting rolling guiding way with three point support to make
sure good cutting quality
4. The back gauge is adjusted by motor and fine adjusted by hand
wheel. The strokes is
shown by autonics digital displayer and can be adjusted stepless.
5. The gap between upper and bottom blades can be adjusted by hand
6. Rectangular blades have four cutting edges and have long service
1. First valve (from U. S. A) make sure good working, long service
life and low noise.
2. NOK oil seal (from Japan) prevents oil leaking with long service
3. Sleeve type pipe joint to make sure there is no oil leaking
4. Best quality pump provide long service life and low noise
1. Schneider or simense electric parts with good quality and easy
to replace around
2. Autonics digital displayer (from Korea) has good accuracy and
3. Autonics encoder (from Korea) has good accuracy and long life
4. Best quality motor provide enough power and low noise.
welcome to contact us:
1. Rack part
By the frame structure of steel plate welding, with good rigidity,
two oil cylinder fixed on the top two columns, the workbench to
stud welding connection.Under the blade mounted
on the workbench, and can make minor adjustments, make blade gap
2. Upper slide rest
For steel plate welded structure, with good rigidity, after its
for the fulcrum,in the driving of the oil cylinder reciprocating
up and down around the complete shear.Adopts three point rolling
eliminate the guide clearance, improve the quality of
four parts all can use, long service life.Rest on the structure of
introversion, facilitate blanking, and can improve the precision of
Rest on the shearing Angle is adjustable, reduce the deformation of
sheet metal distortion,
the handwheel adjustment on the front panel, the left side of the
gap instructions;Front and rear guide rail and the roller adopt
alloy steel forging.
3. Press device
By installing more pressure on the supporting plate in front of the
of oil cylinder,
material cylinder inlet pressure, pressure is expected to head down
overcome the spring tension,pressure plate, after completion of the
by means of the torsion spring
tension and reset.
The size of the force that press a material increases with
increasing by shear
of the thickness of the sheet metal.
4. Keep-off institutions
Before keep-off:By the before keep-off rack and Scale and left
After keep-off(back gauge):In the upper slide rest under the rung,
with the rest on the upand down, back gauge regulation by screw
by a motor drive. Control the movement distance,
and has a soft limit loading system.. The motor can not meet the
size, manual and fine-tuning to ensure that the required values to
So the back gauge adjustment
is convenient and reliable.
5. Machine hydraulic system
This machine adopts hydraulic transmission, the main gear pump,
system through one-way valve,relief valve system, electromagnetic
valve and livestock can opener, etc.
The system is reasonable,
the movement is stable and reliable.
According to mark the direction of arrow rotation after motor
( When the electromagnetic valve does not work) Drive gear pump
will be filtered
oil through oil suction pipe into the valve plate and the
after back to the tank.
Supply pressure by the gear pump used in the system,
the system maximum working pressure for 20 Mpa, set by the overflow
the hydraulic valve have been setting before they go out, normally
the user d
oes not need any adjustment, Shanghai hydraulic
valve is used in the hydraulic valve, all seal wall card, choose
decorate concise, less leakage,easy maintenance and debugging.
6. The machine electrical system
This machine adopts the 50 hz, 380 v ac power supply, by the main
the transformer output 220 voltage control, electromagnetic relief
indicator light and button.. Machine electrical box located on the
of the machine tool, control button in front of the machine
easy operation,which leads to the pedal switch SA3 lead by the
The machine through the knob switch can be a single, continuous and
dynamic capabilities. Machine also has the shear length adjustment,
turn knob, time relay external knob, can adjust length of shear,
rotate the rotary
switch SA2, rev. Bright lights to the line, mobile cut sheet metal,
make the row
in the sheet metal processing line and machine blade projection
can shear required results. Electrical components by Siemens.
Main circuit has corresponding overload and short circuit
safe and reliable, easy to maintain.
1. The second generation of Hydraulic swing beam shearing machine.
2. Rack, blade frame is entire welded,vibration to eliminate inner
3. Use advanced integrate hydraulic system and good reliability.
4. Use three-point support rolling guide to eliminate the support
gap,improve cut quality.
5. The clearance between the blades adjusted by hand wheel
6. Rectangular blade.four cutting edges, and loong service life.
7. Adjustable shearing angle to reduce deformation of the sheet.
8. The upper blade frame use introversion structure,easy for
blanking to improve the
accuracy of production.
9. With the sub-shear function, motorized backgauge,digital
|Maximum shear plate thickness||mm||12|
|Maximum cutting width||mm||6300|
|Shear plate strength||N/m²||450|
|Maximum rear stop stroke||mm||20-1000|
|Fuel tank volume||L||1550|
|Main motor power||K w||37|
Operation Manual(hydraulic diagram,electro diagram)
Colors: According to Customer's requirements
download brochure here
hydraulic guillotine shear.pdf